How To Fill Gap Between Stove And Wall

Download Commodity

Download Article

When yous're cooking, crumbs and ingredients are spring to fall into the gaps between your stovetop and counter. Instead of pulling the range out from the wall to constantly clean underneath, you lot can fill these spaces easily. By purchasing a silicone comprehend for the gap or making your own, yous can have a little less mess, and stress, in the kitchen.

1. 1

   Notice a gap cover online or in hardware stores. Gap covers are long pieces of T-shaped plastic or silicone. The bottom part of the T fits into the infinite betwixt the oven and the counter, while the peak of the T sits flat on your stove and counter. They are available at most hardware stores or online retailers.^[1]

   • The bottom arm refers to the lesser line of the 'T' shape.

2. ii

   Cull a mode that matches your kitchen. Gap covers come in many dissimilar materials, such as plastic and stainless steel, and are offered in many dissimilar colors. For a seamless await in your kitchen, find a gap cover that is clear or closely resembles the color of your countertop.

   • Use a silicone material if there is any top difference betwixt your stovetop and the counter. Silicone is more flexible and will fit the form better.^[two]
   • Use stainless steel gap covers to match a metal stove-elevation seamlessly.

   Advert

3. 3

   Measure the depth of your counter and cutting the cover if necessary. Many of the covers you volition discover will be of one compatible size. Measure from the edge of the counter to the dorsum of the stove to determine the correct size for the gap cover.^[3]

   • If the gap comprehend is shorter than the depth of your stove, leave a gap betwixt the wall and the cover. More crumbs are probable virtually the counter space nearest to you.
   • Silicone covers tin can exist cut to the right size with kitchen shears or a durable pair of scissors.^[4]

4. 4

   Place the embrace into the gap. Lay the lesser part of the encompass into the gap or slide the cover in from the front. The bottom line of the 'T' shape will form a tight seal, preventing crumbs or liquids from spilling into the gap.^[5]

   • Even if the top of the cover fits loose, the lesser strip volition prevent nutrient from falling into the infinite. Wipe away any crumbs under the comprehend with a cloth or rag.
   • If the cover gets visibly muddied, remove information technology and paw-wash it in a sink with dish soap.^[vi] Allow the cover dry out before placing it back in the gap.

Advertisement

1. 1

   Mensurate the size of the gap between your stove and counter. Using a ruler or a tape measure, notice the width of the gap then you can choose the right size tubing. Be sure to measure the gap on each side of the stove, as one side may accept more space than the other!

2. two

   Purchase clear PVC tubing ¹⁄₄ inch (0.64 cm) thicker than the gap. Using clear tube will make information technology close to invisible betwixt your counter and stove. Using a slightly thicker tube will create a firm fit without information technology falling to the floor.^[7] Plastic tubing can be purchased at your local hardware shop and is typically sold by the foot.

   • While clear tubing is discreet, you can purchase other colors if information technology better fits the expect and style of your kitchen.

3. 3

   Push the tubing into the gap until it is level. Brand sure the finish of the tube is butting the wall before securing it. Using your fingers, push button the tube into the space between your counter and stove. Continue it affluent with tops of the counter. If you become too far downwardly, crumbs will notwithstanding fall onto the tubing and be trapped.^[8]

4. iv

   Cut off excess tubing with a pair of shears. Match the length of the tube to the depth of your counter and use shears or scissors to make the cut. Later on making the cutting, use your finger to button whatever excess tube into the gap until information technology is level with the countertop.^[ix]

   • The tubing can be removed and cleaned in a sink of soapy h2o. Let the tube air dry before putting back. If information technology gets muddied or stained, you can replace the tubing entirely.

Advertisement

1. 1

   Purchase a gyre of plastic T-molding to match the countertop way. Transition molding, or T-molding, is typically used in floor to cover a gap and can be purchased at any large box hardware store. T-molding comes in a multifariousness of colors and styles.^[x]

   • Use clear plastic molding for better flexibility and take a less noticeable comprehend. Otherwise, observe a color to add accent to your kitchen.

2. 2

   Cut the molding to the correct length. Measure out from the border of your counter to the back of the stove.^[eleven] Trim the molding with a utility knife or a pair of molding shears so information technology fits the length of the gap.^[12]

3. 3

   Create a tighter fit using duct tape, if necessary. If the molding fits loosely in the gap, comprehend the bottom arm with duct tape to get in thicker. Keep to add duct tape until the molding fits snugly in the gap.^[13]

   • The bottom arm of the T-molding refers to the bottom line of its 'T' shape.
   • Test the fit of the T-molding after each layer of tape until it holds firm.
   • Ensure none of the adhesive part of the tape is exposed.

4. four

   Clean the molding with soapy water. If the molding is likewise dirty to make clean with a dishrag, remove it and let it soak in soapy water. Scrub it with a sponge or dishcloth earlier letting it air dry. Replace the molding one time it has dried.

   • If the molding is stained and cannot be cleaned, repeat the processes to brand another encompass.

Advertizing

Add New Question

• Question

  How do you seal a gap between stove and countertop on a budget?

  

  Eric Shipe is a Kitchen and Bath Designer and the Owner of Bath + Kitchen based in Washington DC. Eric and his team specialize in cabinetry, pattern, and remodels. They serve homeowners, interior designers, architects, and contractors with a refined procedure, creative ideas, 4K photo-realistic renderings, and 360 Panoramic views. Bath + Kitchen was featured in All-time of Houzz 2017-2020. Eric holds a BA in Economics and Business organization Administration from Ursinus College.

  

  Home Improvement Specialist

  Expert Answer

  Cut a small roll of T-molding to size and fit it into the gap. While this is a low-cost alternative, it needs to be measured, cut, and placed to fill the gap.

• Question

  How exercise y'all easily seal a gap between stove and countertop?

  

  Eric Shipe is a Kitchen and Bath Designer and the Owner of Bath + Kitchen based in Washington DC. Eric and his team specialize in cabinetry, design, and remodels. They serve homeowners, interior designers, architects, and contractors with a refined process, creative ideas, 4K photo-realistic renderings, and 360 Panoramic views. Bath + Kitchen was featured in Best of Houzz 2017-2020. Eric holds a BA in Economic science and Business organisation Assistants from Ursinus College.

  

  Home Improvement Specialist

  Expert Answer

  Cutting plastic tubing to size and fit information technology. With tubing, you'll demand to mensurate and cut the fabric to fit the gap. One time you accept the correct size, just place it in the gap between your stove and countertop. You tin can likewise use a stove or counter gap embrace made of silicone, which you lot tin find online or at a hardware store.

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

• Make clean the area between your stove and counter before filling the gap past pulling your range out from the wall. Sweep and mop the area thoroughly.

Advertisement

• Avoid using caulk or other adhesives since the stove or range may accept to exist moved later on.

Advertising

Things You lot'll Need

• Broom and mop (for cleaning beforehand)
• Premade gap cover
• Tape measure
• Kitchen shears or durable scissors
• Articulate PVC tube
• Transition molding (T-molding)
• Duct tape
• Utility knife

Almost This Article

Article Summary X

To fill the gap betwixt the stove and the counter, you can try using a premade gap cover. Get-go, choose a gap cover that matches the mode of your kitchen. Stainless steel or black plastic are pop choices. Then, measure the length of the gap and cut the cover to size if necessary. Once the gap cover is the correct size, simply slide it into the gap betwixt the stove and the counter. You can also endeavor filling the gap using plastic tubing. First, get PVC tubing that'due south ¼ inch thicker than the gap. Slot information technology into the space until it's level. Then, utilize a pair of pair of scissors to cut off the excess tubing. For more information about filling the gap between the stove and the counter, like how to make a guard with T-molding, read on!

Did this summary help you?

Thank you to all authors for creating a page that has been read 213,569 times.

Did this article assist you lot?

Source: https://www.wikihow.com/Fill-the-Gap-Between-the-Stove-and-the-Counter

Share this post